BMCZN - FEATHER FILL PRIMER SURFACER, A391
- MSDS: BMCZN
- Manufacturer: FIBRE GLASS EVERCOAT CO INC
- Product Name: FEATHER FILL PRIMER SURFACER, A391
- National Stock Number: 8030-00N026687
Product Identification
Product ID:FEATHER FILL PRIMER SURFACER, A391
MSDS Date:01/05/1991
FSC:8030
NIIN:00N026687
MSDS Number: BMCZN
Responsible Party
CINCINNATI, OH 45242-2033
US
Emergency Phone: 800-543-4530
Info Phone: 513-489-7600
Preparer: JEFF ZYCH
Cage: 18731
Contractor
Telephone: 513-489-7600
Cage: 18731
Ingredients
5.0@68F
CAS: 100-42-5
RTECS: WL3675000
Fraction By Weight: 12.78%
OSHA PEL 100 PPM
ACGIH TLV: S,50PPM/100STEL;9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
POLYESTER RESIN
Fraction By Weight: 10%
186.0@68F
CAS: 67-64-1
RTECS: AL3150000
Fraction By Weight: 16%
OSHA PEL 1000PPM
ACGIH TLV: 750PPM/1000STEL;9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
76@68F
CAS: 141-78-6
RTECS: AH5425000
Fraction By Weight: 15%
OSHA PEL 400 PPM
ACGIH TLV: 400 PPM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
TOLUENE (SARA III)
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 4%
OSHA PEL 200 PPM/150 STEL
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
TALC (POWDER), CONTAINING NO ASBESTOS FIBERS; (TALC)
CAS: 14807-96-6
RTECS: WW2710000
Fraction By Weight: 25%
OSHA PEL 2 MG/M3
ACGIH TLV: 2 MG/M3
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHAL OF RPTD HIGH CONC MAY CAUSE
LIVER/KIDNEY DAM. INT'L AGENCY FOR RESEARCH ON CANCER (IARC) HAS
CLASSED STYRENE AS POSS HUMAN CARCIN (CLASS 2-B). 2-B
CLASSIFICATION IS NOT BASED ON NEW EVIDENCE THA T STYRENE MIGHT BE
CARCINOGEN BUT ON REVISED IARC CLASSIFICATION SYS & NEW EVIDENCE
FOR STYRENE OXIDE. (EFTS OF OVEREXP)
Explanation of Carcinogenicity:STYRENE: CLASS 2B (IARC).
Effects of Overexposure:HLTH HAZ:INHAL:VAP MAY CAUSE NOSE/THROAT/RESP
TRACT IRRIT. HIGH CONC MAY CAUSE HDCH/NAUS. RPTD HIGH CONC EXPOS
MAY CAUSE LIVER & KIDNEY DAM. SKIN/EYE:PRLNG/FREQUENT SKIN CONT MAY
CAUSE DEFAT, DRY W/IR RIT & POSS DERM. EYE CONT MAY CAUSE TEAR &
IRRIT. SKIN ABSORPTION:DERM & IRRIT. INGEST:MAY CAUSE GI DISTURB
(SUPP DATA)
Medical Cond Aggravated by Exposure:LIVER AND KIDNEY DISORDERS.
First Aid
First Aid:SKIN:WASH WITH SOAP AND WATER. EYES:FLUSH WITH WATER FOR AT
LEAST 15 MIN AND GET MED ATTN. INHAL: REMOVE FROM EXPOSURE. IF
UNCON GIVE ARTF RESP/O*2 AS NEEDED. GET MED ATTN. INGEST: DO NOT
INDUCE VOMIT (ASPIR HAZ). GET MED ATTN.
Fire Fighting
Flash Point Method:CC
Flash Point:-4F,-20C
Lower Limits:1.1%
Upper Limits:6.1%
Extinguishing Media:FOAM, ALCOHOL FOAM, CO*2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:POLYMERIZATION MAY TAKE PLACE AT ELEVATED
TEMPERATURE SUCH AS IN FIRE. IF CONTAINED, VIOLENT RUPTURE MAY
RESULT.
Accidental Release
Spill Release Procedures:REMOVE SOURCES OF IGNITION. ABSORB SPILL WITH
ABSORBENT MATERIAL SUCH AS VERMICULITE OR SAND.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:AVOID STORAGE ABOVE 100F. STORE ONLY
IN ORIGINAL CONTAINERS.
Other Precautions:DOT SHIPPING NAME-FLAMMABLE LIQUIDS.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED CANISTER TYPE RESPIRATOR
MUST BE WORN TO PREVENT INHAL OF VAPORS OR SPRAY MISTS WHEN TLV OR
PEL IS EXCEEDED. WHERE NIOSH/MSHA APPROVED DUST MASK WHEN SANDING
CURED PRODUCT.
Ventilation:PROVIDE SUFFICIENT MECHANICAL (GEN &/OR LOC) EXHAUST
VENTILATION TO MAINTAIN EXPOSURE BELOW TLV.
Protective Gloves:PLASTIC OR CHEMICAL RESISTANT GLOVES.
Eye Protection:CHEM WORK GOG OR FULL LNGTH FSHLD.
Other Protective Equipment:REMOVE AND WASH CONTAMINATED CLOTHING. USE
BARRIER CREAM SUCH AS GLOVE COAT WHEN USING PRODUCT.
Work Hygienic Practices:WASH HANDS BEFORE EATING AND DO NOT SMOKE WHILE
USING.
Supplemental Safety and Health
EFTS OF OVEREXP:/PAIN & DISCOMFORT.
Chemical Properties
HCC:F2
Boiling Pt:B.P. Text:133F,56C
Vapor Pres:SEE INGRED
Vapor Density:HVR/AIR
Spec Gravity:10.5
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NIL
Appearance and Odor:GREY LIQUID, SHARP AROMATIC ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS AND OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT AND DIRECT SUNLIGHT.
Hazardous Decomposition Products:HEATING TO DECOMPOSITION MAY CAUSE
IRRITATING ACRID FUMES.
Conditions to Avoid Polymerization:IF HAZARDOUS POLYMERIZATION OCCURS
WHILE CONTAINED IN CLOSED CONTAINER, VIOLENT RUPTURE MAY RESULT.
Disposal
Waste Disposal Methods:SMALL QTY CAN BE REACTED WITH THE APPROPRIATE
HARDNER TO SOLIDIFY. DISPOSE OF IN ACCORDANCE WITH ALL FEDERAL,
STATE AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.